TOPIC:

darenh wrote:

What lighting are you putting in the mirrors?

Have you got the translation right?

Probably like the ones Tanasa wants a few posts back #11

Hello, I am sorry that my question or my interest is misunderstood ,, I just want to learn about everything or everyone in this forum ,,,,,, and my question, what must be removed from the car to pass the cables to have puddle light in the mirrors ,, thank you ,,,

You need to remove the door card which will give you access to cable routing through the door gater in to the car and upto the mirror mount.
This will give you access to the mirror bolts and connectors where you can remove the mirror from the car.
Before this I would remove the actual mirror by pushing the glass towards the inside of the car enough to hook the clips, the mirror glass can be disconnected and removed from the housing.
Once the glass is removed there are screws to remove the inside to gain access to the cap clips.

A wire can be fed through close to the normal cable route. Of course the cap can be just swiped off but this will break the clips (as seen in YouTube videos), and possibly the cap.

I’ll see if I can dig any photos out

Thank you, please can you say the vidio ... or photos, sorry but I'm big hands,

This is how I take the glass out, gives access to the clips and screws to the rear cap.

This is the inside one the door card has been removed, showing the connectors, the extra cable is my camera cable