Welcome, Guest
Username: Password: Secret Key Remember me

TOPIC:

Drivers door button not working with keyless entry 3 years 10 months ago #7

  • darenh
  • darenh's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 349
  • Thank you received: 154
Door handle removal.

Remove the cap at the end of the door,
use a T27 driver to undo the torxs screw.
It is captive so won’t fall out, I used a pair of pliers just to pull the screw back to release.
The handle end will then pull out.
All four doors are the same, even the drivers door with the lock in will just slide out.
The handle will slide a little to the rear of the car and can be unhooked and removed.
There are wires for the lock button and the hands free antenna is in there as well.
The handle cap will just prise off, I used a small flat driver and a trim tool just to work along each side forcefully but carefully, don’t slip or damage the handle.
I’ve got extra wires going in for handle leds, I ended up changing an led while I had it apart.
It’s a bit tight reassembling, as I have the extra wires. Normally it’ll just clip together.
Reassemble is the reverse.

This message has attachments images.
Please log in or register to see it.

The following user(s) said Thank You: andym

Please Log in or Create an account to join the conversation.

Drivers door button not working with keyless entry 3 years 10 months ago #8

  • darenh
  • darenh's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 349
  • Thank you received: 154

Please Log in or Create an account to join the conversation.

Drivers door button not working with keyless entry 3 years 10 months ago #9

  • andym
  • andym's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 11
  • Thank you received: 5
now we know how to dismantle but what needs to be replaced and where to buy it from?

Please Log in or Create an account to join the conversation.

Drivers door button not working with keyless entry 3 years 10 months ago #10

  • kell
  • kell's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
Hi I have the same problem but mine started after I took my car to Renault for a factory recall on my child locks. It started off with just the drivers door button that wouldn’t work but now passage and boot button won’t work. The time scale is a month from when it first started to now.

Please Log in or Create an account to join the conversation.

Drivers door button not working with keyless entry 3 years 10 months ago #11

  • Roundakela
  • Roundakela's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
OMG! I'm taking mine in on Thursday for the same recall. Fingers crossed it won't happen but I'll speak to the garage before they do it.

Please Log in or Create an account to join the conversation.

Drivers door button not working with keyless entry 3 years 10 months ago #12

  • kell
  • kell's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
I took my car back to Renault after the recall and they told me it was nothing to do with there work as all the child lock recall is 2 rubber bungs they fit to the back door. I just think it very strange it all stared at the same time

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to edit your message.
Time to create page: 1.634 seconds