TOPIC:

Robertp wrote:

Oh, I understand that Lithuania will be added among missing countires to part 3...

Thanks'

Indeed, I missed to add it to the package when I prepared part 2 last Sunday.

Truth is I could have repacked part 2 to add it, but I thought - I either have to re-flash the whole package (~2GB) in my car to make sure its actually working before releasing it, or release it without actually verifying it myself, or just leave Lithuania out and have it packaged separately. Obvious what I chose. 

For reference - what I included in p1/p2 besides the actual maps is, for each country: address points, intelligent routes profiles, points of interest, 3d models of buildings, 3d models of landmarks, speed cameras. Let me know if you notice something else that might be missing so I can add it to p3. 

For time being its only Lithuania that is going to p3.

IMPORTANT! If your dealer says, there is an update from 2 to 7, DO NOT DO IT! All attempts have led to bricked devices. So far one know case in Bulgaria and few more in Germany. All of them are waiting for replacement of RLink devices.

What I read on the Romanian forum is that the 2->7 update procedure is quite complex, so I imagine the dealers personnel is not technical enough, is not following it precisely, or is attempting to perform it on unsupported units, which results in bricking them.

Another thing from the Romanians is, they say the procedure only applies for units with factory Boot version 5XXX, so if you have 4XXX and are offered software update, keep in mind it is not for you (and the dealer might be unaware).

That said, having your R-Link bricked by the dealer, you will most likely end up with warranty replacement that is of newer generation, which may not be that bad solution in the end

Do you think that's a likely scenario?? Have a bricked R Link going in for warranty check on Tuesday but am just expecting them to replace it like-for-like if required. Mine is a late April '17 so just missed out on AA version but will be amazed if Renault do me any favours! 

Hi, I just updated my kadjar 2.x to 3.3 and now parking camera alignment is wrong, is it possible to fix that? and there is no warning at the speed
camera's

For warning on speed camera’s... turn on again
for aligment... it is simple fix, but you need to connect wia ELM module and use DDT4All. Right value is 59,00, not 57 or simmilar. Tested on my Kadjar. Find pictures on corespond post...