TOPIC:

darenh works away for long periods so you may have a long wait for an answer I'm afraid

Hi as Duracel as said I’m very busy at the moment, I intended to put some articles together but I haven’t had enough time.

itll happen soon though when things settle down.

ive got things on my pc whic I may be able to format for here, so it will happen.

Meanwhile the heated seat pads I used are not the carbon type they have a wire element. which enabled me to trim them to fit the seats,
Tribke with the Kadjar seats is they have trim lins running down the centre which is Velcroed to the sponge base so it’s a matter of trimming around this.
The pads are fairy easy to slide in once the rear clips are released.  As for the power I have an aux fuse box which I have ignition power and the switches I found on eBay,  full article to come I hope!

as for the DRLs, yes my rear lights come on with the front DRLs again I have pictures to achieve this using diodes and a power supply and will put something together soon.

You can set to use tailgate lights as DLR using just DDT4ALL and an ODB adapter. 
If you want only the C part of the LED that is Scandinavian lights settings in the ddt4all. 

AlexP wrote:

You can set to use tailgate lights as DLR using just DDT4ALL and an ODB adapter. 
If you want only the C part of the LED that is Scandinavian lights settings in the ddt4all. 

Yes have been following the German site, did mine via a wiring trick last year then discovered the developer menu,   Ive started to get a little more time now so be able to get on the Kadjar again

Hi, I'm interested to get to know more about these:

rearview mirror auto dim/monitor
heat shot windscreen washer

Thanks

Mirror
￡47.27 | AZGIANT 4.3 inch TFT LCD Display Screen Car Monitor Professional Auto Dimming Anti-g lare Rearview Mirror Monitor Much Safer https://s.click.aliexpress.com/e/bQFqKeXB