TOPIC:

Check "Members articles". I wrote quite exhausting manual for fitting a camera, you'll find your answer there.

fixer wrote:

And from what you’re saying camera should show if powered usually when just enabled.

Looking at your 32 pin plug. I’d say your loom is different to what I have seen in 2016/18 models with factory fitted parking sensors.

You need these pins wired in the 32 pin plug for the connection to the head unit this is viewed looking into the head unit socke

 

Hey friend 
Do you have explaining table for the 32pin connector for every pin what is ? 

I don’t I’m afraid, I only know those four

So, I bought used OEM reversing camera, but it arrived without pigtail cable. Anyone knows the pinout of the camera connector? Or have pictures of the both ends (connectors) of pigtail cable, I can figure it out from that.
Thanks.
 

Anyone know the pinout of the OEM reversing camera? I bought used one but it arrived without pigtail cable. I can figure it out if someone have pictures of both ends of that cable...
Thanks.
 

I have figure it out 
This is the pinout. Pin pitch is 1.78mm, I used IC socket and cut 4 pins out of it. Soldered wires to it, put heatshrink and push it into the camera connector.