Welcome, Guest
Username: Password: Secret Key Remember me

TOPIC:

Fitting a reversing camera 3 years 9 months ago #229

  • fixer
  • fixer's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 123
  • Thank you received: 27
One more try at image

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Fitting a reversing camera 3 years 9 months ago #230

  • P8TOH
  • P8TOH's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 0
Super. I'll check that plug tomorrow and report back my findings.

Please Log in or Create an account to join the conversation.

Fitting a reversing camera 3 years 9 months ago #231

  • darenh
  • darenh's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 349
  • Thank you received: 154
You are only checking for 5.5v engine off, Have you checked with the engine running?

The tailgate cables go to a multi way plug and socket under the n/s front passenger footwell kick panel. The rear loom to the dash loom connector. They do change colour here, or are connected to different colour wires that terminate at the Rlink2.
The following user(s) said Thank You: fixer

Please Log in or Create an account to join the conversation.

Fitting a reversing camera 3 years 9 months ago #232

  • P8TOH
  • P8TOH's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 0

You are only checking for 5.5v engine off, Have you checked with the engine running?

The tailgate cables go to a multi way plug and socket under the n/s front passenger footwell kick panel. The rear loom to the dash loom connector. They do change colour here, or are connected to different colour wires that terminate at the Rlink2.


Hi Daren, I tried every possible way I could think of, Engine on and off, In reverse / not in reverse. Just electrics on. Boot open/Closed. Nothing gave a reading on that plug. That's what threw me and I came on here too see if I was missing something.

Please Log in or Create an account to join the conversation.

Fitting a reversing camera 3 years 9 months ago #233

  • fixer
  • fixer's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 123
  • Thank you received: 27
Sounds silly but what are you using to measure voltage?
The pins and wires in the plugs are very well insulated. I placed pins in the slots but you have to make sure you have a good connection and are not shorting the two

Please Log in or Create an account to join the conversation.

Fitting a reversing camera 3 years 9 months ago #234

  • P8TOH
  • P8TOH's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 0

Sounds silly but what are you using to measure voltage?
The pins and wires in the plugs are very well insulated. I placed pins in the slots but you have to make sure you have a good connection and are not shorting the two


My tester has some very fine needle ends, which I can get in the rear of the plug, but also put pins in the slot like you've mentioned just to make sure there was a contact.

Please Log in or Create an account to join the conversation.

  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to edit your message.
Time to create page: 0.140 seconds